Product Introduction
Our portable all-in-one energy storage system packs a LiFePO4 battery, inverter, MPPT controller, and BMS into one compact unit. Plug-and-play, with no complicated installation. It's ideal for home emergency backup, RV travel, outdoor camping, field work, and small off-grid loads. Delivering stable pure sine wave power and supporting solar plus grid dual charging, it brings reliable clean power anywhere.
Product Advantages
1. All-in-One Integrated Design, No Installation Needed
Traditional split solar systems demand professional wiring and bracket installation—this all-in-one power station does away with all that by packing battery, inverter, and controller into a single unit. No tools, no technicians, no complex setup. Plenty of European and American outdoor lovers and families have never installed anything in their lives, yet they can unbox the unit in 2 minutes and start running appliances and camping gear right away, keeping $200–$500 that would otherwise go to local installers.
2. Energy-Storage-Dedicated LiFePO4 Battery, 10+ Years of Service
At its heart sits an energy-storage-dedicated LiFePO4 battery rated for 6000+ deep charge-discharge cycles, with extremely low capacity attenuation and high safety—tough enough to outlast ordinary lead-acid or ternary lithium batteries by a wide margin. Even for households plagued by frequent outages and off-grid users leaning on solar every day, the unit still retains over 70% capacity after 5–6 years of daily cycling, sparing owners frequent replacements and keeping long-term equipment costs down.
3. Truly Portable & Lightweight for Multi-Scene Mobility
An ergonomic integrated handle and compact body keep the unit light enough for a single person to carry, freeing users from the fixed-position limitation of conventional solar systems. Keep it indoors as home backup on weekdays, bring it along to campsites, RVs, and beach outings on weekends, or shift it to a warehouse or courtyard for temporary construction power—one device serves every indoor and outdoor need.
4. Solar & Grid Dual Charging with High-Efficiency MPPT
A built-in high-precision MPPT chip with 98% conversion efficiency juggles both solar off-grid charging and municipal grid charging, squeezing the most from free solar energy to shrink household bills. European and American users charge via solar on sunny days to run lights, routers, and refrigerators at zero cost, then fall back on grid power at night or when rain sets in—saving an estimated 30%–50% of annual household electricity consumption.
5. Pure Sine Wave Output, Safe for All Sensitive Devices
Pure sine wave output mirrors commercial grid power, free of current surges, voltage fluctuation, or harmonic noise, safely shielding sensitive electronics. Where ordinary power stations may burn out laptops, cameras, portable medical devices, and mini refrigerators due to unstable current, our pure sine wave technology keeps precision equipment running stably over the long term—widely trusted by outdoor photographers, home medical care users, and RV travelers.
6. Intelligent WiFi Monitoring & Full Safety Protection
The intelligent BMS delivers full overcharge, overdischarge, overload, short circuit, and temperature protection, while WiFi APP real-time monitoring makes power management visible. While camping or traveling, users can check remaining power and solar generation data remotely via phone. Should overload or abnormal temperature arise, the system automatically cuts power to prevent equipment damage and fire risks, ensuring safe, worry-free use.
7. Ultra-Quiet & Wide Temperature Adaptation
Silent cooling holds operating noise below 45dB, with stable operation from -20℃ to 60℃, adapting to extreme cold and high-temperature outdoor environments. It works reliably in hot summer camping scenes across Southeast Asia and Southern Europe, and also powers mountain residences and outdoor skiing in cold northern regions. Ultra-quiet operation won't disturb indoor rest or outdoor camping leisure.
Application Scenarios
1. Camping & Outdoor Activities
Runs cooking gear, lighting, and electronics when you're away from the grid.
2. Household Emergency Backup
Sustains essential loads through blackouts: lights, fridge, and router.
3. Field Construction & Maintenance
Furnishes temporary power for small tools.
4. RV & Mobile Living
Delivers an independent power supply for extended road trips.
5. Remote Rural Off-grid House
Tackles unreliable grid power supply.
Specifications
25.6V 3.6KW + 5KWH
25.6V 5KW + 8.5KWH
51.2V 6KW + 16KWH
Product Features
All-in-One Compact Design, Plug & Play — Battery, inverter, and MPPT controller are built in, so no extra parts need assembling.
Pure Sine Wave AC Output — Safe for laptops, medical devices, and sensitive electronics.
Solar + Grid Dual Charging — Flexible charging from sunlight or mains electricity.
Energy-Storage-Dedicated LiFePO4 Battery — 6000+ deep cycles, long lifespan, and high safety.
Smart BMS Multi-Level Protection — Guards against overcharge, overdischarge, short circuit, overload, and overheating.
WiFi APP Remote Monitoring — Check SOC, power, and running status from your phone.
Wide Temperature Range & Low Noise — Reliable operation across different climates with minimal noise.
FAQ
Q1: Can this machine charge from solar panels?
A1: Yes—the built-in MPPT solar controller is compatible with corresponding solar panels.
Q2: Is the output pure sine wave?
A2: Yes—pure sine wave AC output, safe for sensitive electronic equipment.
Q3: What is the battery cycle life?
A3: Energy-storage-dedicated LiFePO4 cells deliver 6000+ deep cycles.
Q4: Can it be used in an RV?
A4: Yes—compact and portable, it is widely used for RV power supply.
Q5: What are the warranty terms?
A5: A 5-year warranty covers the whole unit, with online technical support available at all times.
Q6: Do you support OEM/ODM?
A6: Yes—custom logo, color, packaging, and capacity are all available.
