Product Introduction
Our portable all-in-one energy storage system combines a LiFePO4 battery, inverter, MPPT controller, and BMS in one compact unit. Plug-and-play design means no complicated installation. It suits home emergency backup, RV travel, outdoor camping, field work, and small off-grid loads. Delivering stable pure sine wave power with solar and grid dual charging, it brings reliable clean power wherever you go.
Product Advantages
1. Truly Portable & Lightweight for Multi-Scene Mobility
An ergonomic integrated handle and compact body keep the unit light enough for one person to carry, breaking free from fixed solar systems that are stuck in a single spot. Users can keep it indoors as home backup on weekdays, haul it to campsites, RVs, and beach outings on weekends, or shift it to a warehouse or courtyard for temporary construction power at work. One device covers every indoor and outdoor power need.
2. All-in-One Integrated Design, No Installation Needed
Unlike traditional split solar systems that call for professional wiring and bracket installation, this all-in-one power station puts battery, inverter, and controller into a single unit—no tools, technicians, or complex setup involved. Plenty of European and American outdoor enthusiasts and families have zero installation experience, yet they can unbox the unit in 2 minutes and immediately power home appliances and camping devices, pocketing $200–$500 in local installer fees.
3. Energy-Storage-Dedicated LiFePO4 Battery, 10+ Years of Service Life
The unit carries an energy-storage-dedicated LiFePO4 battery with 6000+ deep charge-discharge cycles, extremely low capacity attenuation, and high safety—far tougher than ordinary lead-acid and ternary lithium batteries. For families facing frequent outages and off-grid users leaning on solar daily, the unit still holds more than 70% capacity after 5–6 years of daily cycling, sparing them frequent replacement and trimming long-term equipment costs.
4. Solar & Grid Dual Charging with High-Efficiency MPPT
A built-in high-precision MPPT tracking chip with 98% conversion efficiency handles both solar off-grid charging and municipal grid charging, wringing the most from free solar energy to cut household bills. European and American households charge via solar on sunny days to run lights, routers, and refrigerators at no cost, then switch to grid charging at night or on rainy days—saving an estimated 30%–50% of annual household electricity consumption.
5. Pure Sine Wave Output, Safe for All Sensitive Devices
Pure sine wave output mirrors commercial grid power, free of current surges, voltage fluctuations, or harmonic noise, safely shielding sensitive electronic equipment. Where ordinary power stations may burn out laptops, cameras, portable medical devices, and mini refrigerators due to unstable current, our pure sine wave technology keeps precision equipment running stably over the long haul—widely recognized by outdoor photographers, home medical care users, and RV travelers.
6. Intelligent WiFi Monitoring & Full Safety Protection
The intelligent BMS delivers full overcharge, overdischarge, overload, short circuit, and temperature protection, while WiFi APP real-time data monitoring makes power management visible. When users are out camping or traveling, they can check remaining power and solar generation data remotely via mobile phone. Should overload or abnormal temperature occur, the system automatically cuts power to prevent equipment damage and fire risks, ensuring safe, worry-free use.
7. Ultra-Quiet & Wide Temperature Adaptation
Silent cooling keeps operating noise below 45dB, with stable operation from -20℃ to 60℃, adapting to extreme cold and high-temperature outdoor environments. It works steadily in hot summer camping scenes across Southeast Asia and Southern Europe, and also supports normal power supply for mountain residences and outdoor skiing in cold northern regions. Ultra-quiet operation won't disturb indoor rest or outdoor camping leisure time.
Application Scenarios
1. Camping & Outdoor Activities
Keeps cooking gear, lighting, and electronics powered when you're off the grid.
2. Household Emergency Backup
Holds essential loads running through blackouts—lights, fridge, and router.
3. Field Construction & Maintenance
Supplies temporary power for small tools.
4. RV & Mobile Living
Offers an independent power supply for long road trips.
5. Remote Rural Off-grid House
Tackles unreliable grid power supply.
Specifications
25.6V 3.6KW + 5KWH
25.6V 5KW + 8.5KWH
51.2V 6KW + 16KWH
Product Features
All-in-One Compact Design, Plug & Play — Battery, inverter, and MPPT controller are built in, with no extra parts to assemble.
Pure Sine Wave AC Output — Safe for laptops, medical devices, and sensitive electronics.
Solar + Grid Dual Charging — Flexible charging from sunlight or mains electricity.
Energy-Storage-Dedicated LiFePO4 Battery — 6000+ deep cycles, long lifespan, and high safety.
Smart BMS Multi-Level Protection — Guards against overcharge, overdischarge, short circuit, overload, and overheating.
WiFi APP Remote Monitoring — Check SOC, power, and running status from your mobile phone.
Wide Temperature Range & Low Noise — Reliable operation across different climates with minimal noise.
FAQ
Q1: Can this unit charge from solar panels?
A1: Yes—the built-in MPPT solar controller works with compatible solar panels.
Q2: Is the output pure sine wave?
A2: Yes—pure sine wave AC output, safe for sensitive electronic equipment.
Q3: What is the battery cycle life?
A3: Energy-storage-dedicated LiFePO4 cells deliver 6000+ deep cycles.
Q4: Can it be used in an RV?
A4: Yes—compact and portable, it is widely used for RV power supply.
Q5: What are the warranty terms?
A5: A 5-year warranty covers the whole unit, with online technical support available at all times.
Q6: Do you support OEM/ODM?
A6: Yes—custom logo, color, packaging, and capacity are all available.
