Product Introduction
This 16kWh 51.2V lithium iron phosphate storage cabinet is engineered for European residential photovoltaic schemes. It captures surplus solar output for later use and delivers standby power once mains supply cuts out. All internal cells are freshly manufactured A-grade LiFePO4 modules sourced from reputable prime cell manufacturers. Refurbished, dismantled or pre-owned cells are never adopted in assembly. Each individual cell integrates an independent burst-proof valve to strengthen inherent safety properties. The cell design supports over 8000 charge-discharge lifecycles and allows 95% depth of discharge, helping homeowners make full use of the 16kWh energy reserve without accelerating cell degradation.
Product Features
New A-grade LiFePO4 cells supplied by top cell manufacturers, no reconditioned or second-hand cells; independent burst-proof valve equipped per cell, 8000+ charge cycles supported, 95% permissible discharge depth
16kWh nominal capacity, 51.2V standard working voltage, compatible with most mainstream grid-tied, hybrid and off-grid solar inverters, capable of high-power output for high-consumption domestic loads
Integrated JK 2A active equalisation BMS, cell voltage gap kept below 5mV, stabilises cell consistency and reduces gradual capacity loss over the years
Internal 4AWG flexible flame-retardant power wiring, DC breaker and fuse dual protection layout to avoid short-circuit hazards
4.3-inch industrial capacitive touch screen, onsite access to SOC, voltage, current and real-time operational data
Bluetooth, RS485, RS232 and CAN multi-bus communication, mobile APP remote monitoring, single-cell parameter check and fault alert push
Full-range BMS protection mechanism: overcharge, overdischarge, overcurrent, overvoltage and thermal protection with automatic power shutdown
IP20 indoor protection class, natural air cooling design, fanless quiet operation, free from regular maintenance work
Each completed 16kWh cabinet undergoes a 72-hour continuous charge-discharge ageing test; MSDS, UN38.3, IEC certification package for seamless EU customs declaration
Application Scenarios
Captures solar energy during the day for use when electricity demand rises.
Stores surplus solar energy and raises solar power utilization.
Delivers reliable stored energy for essential household loads.
Well suited to shops, offices, and other small commercial applications.
FAQ
Q: What capacities do you offer?
A: 5.12kWh, 10.55kWh, 14.33kWh, 16.08kWh, and 21.09kWh.
Q: Is capacity expansion available?
A: Yes—up to 15 batteries can be paralleled.
Q: What is the cycle life?
A: Up to 8,000 cycles, depending on the model.
Q: What warranty comes with it?
A: 10 years.
Q: Which communication interfaces are supported?
A: CAN, RS485, and RS232.
